STEP 1 Base Frame Assembly
4
32
32
2
59
59
59
6
59
59
59
55
55
55
32
32
3
59
55
34
34
67
1
4
55
55
55
59
55
To ease the assembly process, do NOT tighten bolts until instructed.
Assembly requires two people.
1. Attach the Base Connector (6) to the Bolts welded on the Front Stabilizer (2) using two 1/2"
Washers (55) and two 1/2" Nylon Nuts (59).
2. Attach the Base Connector (6) to the Bolts welded on the Rear Upright (3) using two 1/2"
Washers (55) and two 1/2" Nylon Nuts (59). Slide the two 50 X 75 mm End Caps (32) onto the
Front Stabilizer (2) and the Rear Upright (3).
3. Attach the pre-assembled Main Frame (1) to the vertical bolts welded on the Front Stabilizer (2)
using two 1/2" Washers (55) and two 1/2" Nylon Nuts (59). Attach the Rear Upright (3) to the
bolts welded to the top of the Main Frame (1) using two 1/2" Washers (55) and 1/2" Nylon Nuts
(59). Slide the two 75 X 50 mm End Caps (34) onto the Main Frame (1).
4. Slide the 50X50 mm Sq Cap (67) onto the
Linear Bearing Assembly (4).
