BodyCraft ELITE STRENGTH, Assembly Instruction Manual

Page: 25 / 25

AssemЫy is complete! Please take the following steps before using the gym:
1. Make certain all bolts are tightened securely.
2. Make certain all саЫеs are seated into all pulley grooves. А саЫе rubЬing
against steel will peel the nylon coating, voiding waпanty and resulting in
а need for replacement.
3. Pre-stretch the саЫеs. Put the Weight Selector Pin (75) in the bottom hole on
the weight stack. Pull on the саЫеs with great force, helping remove any kinks
and providing any initial саЫе stretch.
4. Ве aware the саЫеs can loosen and slightly stretch upon initial use.
5. Тhе саЫеs should Ье adjusted as tight as possiЫe, but no so tight as to lift the
Тор Plate (58) above the weight stack. Ве certain to secure the jam nuts after
adjustments are made.
6. For better performance, apply а household lubricant (such as silicone) to
any adjustaЫe areas and to the Guide Rods ( 6).
7. Enjoy many · years of а Fit Lifestyle.
Thank you for .purchasing the BodyCraft Elite Strength Training
System. If you have any questions, please call your local
BodyCraft dealer, call our customer service department at
+7 (383) 214-09-36 or at abfitness.ru.