BodyCraft E1000, Owner'S Manual

Page: 21 / 44

Product Assembly
h. Then slightly attach 2pcs Nylon Nuts
(M10 x p1.5) (134) , 2pcs Washers (10 x
23 x 2.0t) (123)
, 2pcs
Lock Washers
(M10) (116) , 2pcs Hex Bolts (M10 ×
p1.5 × 20mm) (158).
i. Repeat STEP 8a thru 8h to the Left side
using the Left Stationary Handrail (74) &
Left Rear Support Tube (102).
S
TEP 8
–
(Continued) h thru i.
Please Hand Tighten All Bolts Until STEP 9
Tighten Bolts & Nuts at this time
to the Recommended Torque Specs
25 ft-lbs
+/- 2 lbs
25 ft-lbs
+/- 2 lbs
25 ft-lbs
+/- 2 lbs
10 ft-lbs
+/- 2 lbs
15 ft-lbs
+/- 2 lbs
25 ft-lbs
+/- 2 lbs
25 ft-lbs
+/- 2 lbs
25 ft-lbs
+/- 2 lbs
15 ft-lbs
+/- 2 lbs
STEP 9 – “Torque Time”
Tighten all Hex Bolts, Nuts &
Button Head Screws to the recommendations below.
21