STEP 2 Weight Base Assembly
5
205
214
214
213
213
206
213
204
204
210
210
210
201
222
224
224
202
224
225
224
225
213
221
208
1. Attach the Weight Base (202) to the
Square Rear Stabilizer (201), using
two 3/8" X 3" Head Bolts (222), four
3/8" Washers (224) and two 3/8"
Nylon Nuts (225).
2. Attach three 45 X 75mm Caps (210)
to the Weight Base (202).
3. Insert the two Guide Rods (205) into
the holes in Weight Base (202) and
slide two Stack Spacers (204), two
Rubber Cushions (213) over top and
down the Guide Rod (205).
IF YOU HAVE PURCHARSED THE
OPTIONAL F200 WEGIHT STACK
UPGRADE KIT:
Do not use the Stack
Spacers provided if you have
purchased Optional F200 weight
stack. Instead, use the Stack Spacers
provided in the F200 kit.
4. Slide the Top Plate (206) over top and
down the Guide Rod (205). Slide two
Rubber Cushions (213) and two
Spring Clips (214) onto the Top Plate
(206).