Customer Service 1-888-707-1880 Maurice Pincoffs Canada Inc.© 2010
10
STEP 8
Slide the hand pulse wire
(10)
from the stationary handlebar (8) around the rear of upright post
(19)
.
Attach the stationary handlebar
(8)
to the bracket of the upright post
(19)
and secure
with two spring washers
(13)
and two allen head bolts
(90)
.
STEP 9
Remove the four screws
(88)
from the back of the monitor
(4).
Connect the extension sensor wire
(22)
to the wire from the back of the monitor
(4)
.
Connect the extension motor cable
(63)
to the cable from the back of the monitor
(4)
.
Attach the monitor
(4)
to monitor bracket of upright post
(19)
and secure with the four screws
(88)
which have been previously removed.
Connect the hand pulse wire
(10)
to the monitor
(4)
.
.
YOUR UNIT IS NOW FULLY ASSEMBLED.
ENSURE THAT ALL NUTS AND BOLTS ARE FIRMLY TIGHTENED
