Customer Service 1-888-707-1880 7 Maurice Pincoffs Canada Inc.©2010
STEP 3
1. Connect the extension sensor wire (54) to the sensor wire (52).
2. Turn the tension control knob (11) to level 8. Insert the end of the tension cable (11) to the
bracket of the lower tension control cable (53). See inset.
Note: it is necessary to insert
the cable into the main frame once attached.
3. Attach the upright (9) to the main frame (1). Secure using eight allen screws (34), four
curved washers (7) and four flat washers (38).
4. Insert the axle (10) through the upright (9). Attach the left bottom handlebar (13L) to the
left side of the axle (10). Secure with one D type washer (18), one flat washer (17), one
spring washer (16) and one hex head screw (15) which are pre-assembled on the axle.
5. Attach the left foot pedal arm (42L) to the left bottom handlebar (13L). Secure using one
hex head bolt (19), one sleeve (20), one flat washer (22), one nylon locknut (21) and two
PVC caps (14).
6. Repeat for the right bottom handlebar (13R).
