4
2
S T E P
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end
of step 2.
A.
Attach Back Pad (8) with Pad Wrap (9) to Back Pad Structure (E) as shown using:
four 20 (hex bolt M8 x 55 mm)
four 26 (spring washer 8mm)
four 25 (flat washer 8mm)
B.
Attach Seat Pad (7) to Seat Pad Structure (F) as shown using:
two 21 (hex bolt M8 x 21 mm)
two 26 (spring washer 8mm)
two 25 (flat washer 8mm)
