Body Solid POWERLINE PSS-60X, Owner'S Manual, Page: 12 / 16

PSS-60X
STEP 2
BE CAREFUL TO ASSEMBLE ALL COMPONENTS
IN THE SEQUENCE THAT THEY ARE PRESENTED.
NOTE:
finger tighten all hardware in this step. DO NOT wrench tighten
until the last step. some components may be pre-assembled.
nylon lock nuts will not fully screw onto bolts, must wrench tighten.
2A. insert nylon bushing onto both top openings of base
frames (A) using:
2 - (#5) 50X45mm nylon bushing
2B. insert an adjuster frame (B) into each base frame (A)
and secure the height of the adjuster frame (B) using
a gravity pin (#4).
note: make sure both adjuster frames (B) are facing the
same direction.
12