Body Solid Powerline PPR1000, Owner'S Manual

Page: 12 / 18

PPR1000
STEP 3
BE CAREFUL TO ASSEMBLE ALL COMPONENTS
IN THE SEQUENCE THAT THEY ARE PRESENTED.
NOTE:
finger tighten all hardware FIRST in this step. wrench tighten all
hardware at the END of step 3A. some components may be pre-assembled.
nylon lock nuts will not fully screw onto bolts, must wrench tighten.
3A. Attach Side Crossbars (G) to uprights (B) using:
8 - (#1) m12x80mm hex head bolt
16 - (#3) m12 flat washer
8 - (#4) m12 nylon lock nut
4 - (H) short steel Bracket
3B. Insert End Caps (#5) onto the open ends of Base
Frames (A).
12