8
S T E P
1
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. Wrench tighten ALL hardware at the end until the
last step. Some components may be pre-assembled.
1A.
Attach one Base Frames (
B
) to two Side frames
(A)
using:
4 - (#1) M10x70mm Hex Head Bolt
8 - (#4) M10 Flat Washer
4 - (#5) M10 Nylon Lock Nut
1B.
Attach two Upright Frames
(C)
to Side Frames
(A)
using:
4 - (#2) M10x20mm Hex Head Bolt
4 - (#4) M10 Flat Washer
1C.
Attach two Upright Frames
(C)
to Top Cover
(D)
using:
2 - (#3) M10x95mm Hex Head Bolt
4 - (#4) M10 Flat Washer
2 - (#5) M10 Nylon Lock Nut