Body Solid G5S, Assembly Instructions Manual, Page: 2 / 39

1
Be careful to assemble all components
in the sequence they are presented.
mm
Inch
A. Insert two Foot Caps (9) into the ends of Rear Base Frame (B). Insert Convex End Cap (3) to
the top of Rear Vertical Frame (C).
B. Attach Main Base Frame (A) to Rear Base Frame (B) and Rear Vertical Frame (C) using:
Two 52 (1/2” x 3 1/2” hex head bolt)
Four 57 (1/2” washer)
Two 55 (1/2” nylon lock nut)
C. Insert two Foot Caps (9) to the ends of Side Base Frame (D).
D. Attach two Side Base Frames (D) to Main Base Frame (A) using:
Two 47 (3/8” x 3” hex head bolt)
Four 58 (3/8” washer)
Two 56 (3/8” nylon lock nut)
E. Insert Weight Stack Shim (20) to Main Base Frame (A).
Connect Frame Leveler (87) to Main Base Frame (A).
Insert Convex End Cap (3) to the side of Main Base Frame (A) as shown.
2
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of step 7.
S T E P