Assembly Instructions
A s s e m b l y S t e p 4-A
Hardware Required
Remove the two Special Washers (#29), two D Shape washers
(#15), two Spring Washers (#14) and two Bolts (#13) that are
pre-assembled on the Handlebar Axle (#16). Insert the Handlebar
Axle (#16) through the Main Frame (#1A). Make sure the Handlebar
Axle (#16) is centered. If you encounter too much friction, try using
WD40 or Vaseline as a lubricant. Insert two Special Washers (#29)
that were just removed on the Handlebar Axle (#16)
followed by
Right Handlebar (#4R) and Left Handlebar (#4L) on each side and
then secure them with two D Shape washers (#15), two Spring
Washers (#14) and two Bolts (#13) that were just removed.
Then attach the Right Handlebar (#4R) to the Right Linkage (#6R) with a
Washer (#19) in the between, secure with a Bolt (#18), a Washer
(#19) and a Nylon Nut (#20).
Carefully cut off the zip tie on the bushing of the Right Linkage (#6R)*
Page 9
BRF 700/701
55
40
1
2
3
4
55
40
1
2
3
4
Repeat this process on the left side**.