BUB350/BUB375
Page 9
Assembly STEP 5
Attach Seat Cushion Tube
(#04)
(now with Seat Cushion
Adjust Bracket
(06)
) to the Main Frame
(#02)
, secure them
together by using one Hex Bolt
(#12)
, two Washers
(#19)
and one Nylon Nut
(#17)
from the rear hole on the Seat
Cushion Tube
(#04)
and front hole on the Main Frame
(#02)
bracket.
Screw a Hex Bolt
(#14)
through bottom of the Seat Cushion
Adjust Bracket
(#06)
, and secure it use a Nylon Nut
(#16)
.
This is for safety measure.
Insert Lock-pin
(#10)
into the hole on the Main Frame
(#02)
and any desired hole setting on the Seat Cushion Adjust
Bracket
(#06)
.
Hardware Required
#16
Nylon Nut (M8)
[1 Piece]
#17
Nylon Nut (M10)
[1 Piece]
#10
Lock-pin (Ø10x85L)
[1 Piece]
#12
Hex Bolt (M10x85 mm)
[1 Piece]
#14
Hex Bolt (M8x16 mm)
[1 Piece]
#19
Washer (Ø10.5xØ25)
[2 Piece]
