10
operating window, the parameters, mode and status of the machine can be adjusted from the
button in the screen. It is very easy to learn and operation.
6.6 Emergency Switch
Emergency switch connected with the general power supply, press the button, the
machine will be turned off. Before restarting the machine, should switch the key switch to
“OFF” , and adjust the emergency according to the mark position, then turn the key switch to
“ON”
6.7 Laser beam output warning
As long as there is laser output, the LCD screen will appears a light warning, the warning
light and the laser output completely synchronization.
ATTENTION
If you find out the warning light is in constant light, please press the emergency switch
immediately to turn off the machine.
6.8
Disinfection measures
As the hand piece needs to contact with, please disinfection more than 10 minutes by
alcohol or iodine before use it.
7. Specifications
Laser type
Diode Laser
Wavelength
808 nm
Max. Input Power
3200 W
AC Power Supply
110V±10%, 220V±10%, 50~60 Hz
Big Spot Size
22*35 mm
Laser Power
1500 W
Pulse Width
15~100 ms, adjustable
Energy
0~37 J/cm
2
, adjustable
Frequency
1~5 Hz, adjustable
Small Spot Size
12*10 mm
