5
STEP 8 :
Pump up the board with up and down
motion of the pump.
STEP 9 : Once the board has taken shape, and
you begin to feel resistance from the pump,
switch the lever from Dual Action to Single
Action. The switch is located at the top of the
pump cylinder.
IMPORTANT: The needle on the pressure gauge
will not move (register a pressure) until AFTER
the board has taken shape.
STEP 10 : Continue to pump the board to 15 PSI
(1 Bar), with 15 PSI being maximum pressure.
IMPORTANT: Note that on the pressure gauge
the yellow area indicates under inflation, the
green area is target inflation range, and red area
indicates over inflation.
QUICK START MANUAL
Body Glove Inflatable Paddle Board
Body Glove Inflatable Paddle Board
Body Glove Inflatable Kayak
(ACTUAL COLOR AND MODEL MAY VARY FROM THE BOARD YOU PURCHASED)
Single Action
Dual Action
1
2