BR
F 700
Assembly Instructions
A s s e m b l y S t e p
4
Hardware Required
Remove the two
Special Washers (#29),
two
D Shape washers
(#15)
, two
Spring Washers (#14)
and two
Bolts (#13)
that are
pre-assembled on the
Handlebar Axle (#16)
. Insert the
Handlebar
Axle (#16)
through the
Main Frame (#1).
Make sure the
Handlebar
Axle (#16)
is centered. If you encounter too much friction, try using
WD40 or Vaseline as a lubricant. Insert two
Special Washers (#29)
that were just removed on the
Handlebar Axle (#16)
followed by
Right Handlebar (#4R)
and
Left Handlebar (#4L)
on each side and
then secure them with two
D Shape washers (#15)
, two
Spring
Washers (#14)
and two
Bolts (#13)
that were just removed.
7KHQD
ttach the
Right Handlebar (#4R)
to the
Right Linkage (#6R)
with a
Washer (#19)
in the between, secure with a
Bolt (#18)
, a
Washer
(#19)
and a
Nylon Nut (#20).
Carefully cut off the zip tie on the bushing of the
Right Linkage (#6R)
Page
8
Summary of Contents for BRF 700
