Page 5
Hardware Required
A s s e m b l y S t e p 1
(REAR)
(FRONT)
WASHER
#55. Washer (M10)
[8 Pieces]
#46. Hex Bolt (M10x85 mm)
[4 Pieces]
NUT
#53. Nylon Nut (M10)
[4 Pieces]
BOLT
A). With the help of an assistant, stand both
Right
Upright (#01)
and
Left Upright (#02)
on level flooring
as illustrated.
Attach the
Rear Cross Tube (#03)
to the
Right/Left
Uprights (#01/#02)
and secure together by inserting
from the rear side as illustrated -- on each side -- two
Hex Bolts (#46)
through two
Washers (#55)
followed
by an additional two
Washers (#55)
and two
Nylon
Nuts (#53).
B. Attach/insert the
Backrest Adjustment Tube (#09)
onto the same bracket notch settings*** on both
Right
Upright (#01)
and
Left Upright (#02).
***NOTE:
Please ensure any settings on left/right sides match
and are equal for alignment to avoid serious injury.
55
40
1 2 3
4
55
40
1 2 3
4
STEP3:
Assembly Instructions
A
B
BCB 5860