manualshive.com logo in svg

Body Clock 3-in-1 COMBO, Instructions For Use Manual

Share
Download
Body Clock 3-in-1 COMBO Instructions For Use Manual Download Page 28

28

6.11 WHERE DO I ATTACH ELECTRODE PADS?

a.  Each person reacts differently to electronic nerve 

stimulation. If your application is not successful, 
contact your physician to find out what placement 
techniques are best for you.

b.  Do not use a smaller sized electrode than those 

originally provided by the manufacturer or 
authorised distributor. Otherwise the current density 
may be too high and cause injuries.

c.  The size of the electrodes should not be altered.

d.  Ensure that the region radiating the pain is enclosed 

by the electrodes. In case of painful muscle groups, 
attach the electrodes in such a way that the affected 
muscles are also surrounded by the electrodes.

Usage advice for TENS:

If you do not feel any discomfort during the treatment, 
we advise you to use the device until the session ends. 
We suggest 1~2 treatments per day while needed. 
If you have any doubts please seek advice from your 
supervisory medical professional on treatment plans.

After a period of treatment, if the pain relief is not 
achieved or the pain gets even worse, please consult your 
supervisory medical practitioner.

Usage advice for EMS:

Place the electrodes on the body part you wish to treat 
referring to the pad placement chart on page 20.

Bodyclock3in1-85x140mmManual.indd   28

29/10/2019   17:12

Summary of Contents for 3-in-1 COMBO













































Reviews:

No comments

Brands by name

Popular brands

Load more brands