Body Clock Health Care Femme Elite, Instructions For Use Manual

Page: 6 / 20

Setting up your Femme Elite
Check the following contents:
1 x Femme Elite unit
1 x Pack of 4 self adhesive electrodes
1 x Leadwire adaptor
1 x Elite vaginal probe
1 x Lithium battery
1 x Lubricant gel sachet
1 x Carrying Pouch
The assembly stage
a) Slide open the battery cover on the back of the
unit and insert the battery, ensuring the
positive (+) side is visible and facing upward.
Replace the cover (see fig. 1, page 7).
b) Connect the leadwire adaptor to the Femme
Elite unit by inserting the protruding pin on the
adaptor into the holes on the back of the
Femme Elite. Slide upwards to ensure it is fixed
securely (see fig. 2, page 7).
When using the Pelvic Floor
Stimulation mode.
• Connect the Elite vaginal probe according to the
instructions found in probe packaging.
• Switch the Mode Selector to ‘PELV’.
When using the TENS and EMS modes.
• Connect the pin ends of the leadwire adaptor
into the electrodes (see fig. 2, page 7).
• Switch the Mode Selector to ‘TENS’ or ‘EMS’.
6