Assembly STEP 4
Hardware Required
A. COUPLER BAR ASSEMBLY
Remove Hex Bolt
(#23)
,
Washer
(#34)
,
Big Washer
(#31)
,
Wavy
Washer
(#37)
,
Plastic Washer
(#43)
that are pre-assembled on Center
Post welded axle
(#02).
Referring to the diagram below, on the left
side of the Center Post
(#02)
, in the following order, slide on one
Plastic Washer
(#43)
, one Wavy Washer
(#37)
, followed by the Left
Coupler Bar
(#04L)
, one Big Washer
(#31)
, one Washer
(#34)
and
secure using one Hex Bolt
(#23)
.
On the opposite side, assemble, in the following order, one Plastic
Washer
(#43)
, one Wavy Washer
(#37),
followed by the Right Coupler
Bar
(#04R)
, one Big Washer
(#31)
, one Washer
(#34)
and secure
using one Hex Bolt
(#23)
. Attach two Bolt Caps
(#27)
on two Hex Bolt
(#23)
as illustrated in the drawing.
B. PEDAL TUBE ASSEMBLY
Attach the Left Pedal Tube
(#03L)
onto the Crank
(#10)
as illustrated
and secure by inserting from the outer edge of the Left Pedal Tube
(#03L)
: one Pedal Hinge Bolt
(#18L)
and one Wavy Washer
(#32)
.
Secure from the inner side (behind the Crank
(#10)
with one Spring
Washer
(#30)
and one Left Nylon Nut
(#40)
. Secure the
#18L
by
turning it
COUNTER-CLOCKWISE.
Repeat this process on the other side using the Right Pedal Tube
(#03R)
. Secure the
#18R
by turning it
CLOCKWISE.
03L
#18L
Left Pedal Hinge Bolt
[1 piece]
#18R
Right Pedal Hinge Bolt
[1 piece]
L
R
#40
Left Nylon Nut
(with black inner nylon ring) (1/2")
[1 piece]
#41
Right Nylon Nut (with white inner
nylon ring) (1/2")
[1 piece]
#30
Spring Washer (1/2")
[2 pieces]
#32
Wavy Washer (1/2")
[2 pieces]
#23
Hex Bolt (M
8x15 mm)
[ 2 pieces]
#34
Washer (M8xφ26 mm)
[2 pieces]
#37
Wavy Washer
(φ19 mm)
[2 pieces]
#31
Big Washer
[2 pieces]
#27
Bolt Cap (S14)
[2 pieces]
Turn COUNTER-CLOCKWISE
Standing from Left side
of the bike
Turn CLOCKWISE
Standing from Right side
of the bike
BRM3635/BRM3810
Page 9
