BR2117 BR3151
Page 12
Assembly STEP 6
Hardware Required
PEDAL ASSEMBLY
Attach the
Left Pedal (#44)
onto the
Left Pedal Tube (#03L)
as
shown in the drawing below using two
Hex Bolts (#22)
and
securing from the bottom with three
Washers (#35)
, and three
Nylon
Nuts (#38)
. Repeat this process on the other side using
(#45)
and
Right Pedal Tube (#03R)
.
Right Pedal
HANDLEBAR ASSEMBLY.
On the left side, insert
Left Handle Bar (#07L)
over the opening at
the tip of
Left Coupler Bar (#04L)
. Align the holes of the
Left Handle
Bar (#07L)
and
Left Coupler Bar (#04L)
and secure by using two
Bolts (#17)
and two
Carriage Bolts (#14)
as illustrated. Repeat this
process on the other side using
Right Handle Bar (#07R)
and
Right
Coupler Bar (#04R)
.
#14. Carriage Bolt (M6x16 mm)
[4 Pieces]
#17. Bolt (M6x15 mm)
[4 Pieces]
#22. Hex Bolt (M8x40 mm)
[4 Pieces]
#38. Nylon Nut (M8)
[4 Pieces]
#35. Washer (M8, φ16 mm)
[4 Pieces]
