Remove
screws
Install and
twist
Reinstall the
last screw
Figure 21
Figure 20
Figure 19
5) Take the new brake block and fasten
it to the frame by tightening the screw
closest to the brake block. Then place
the block in the correct position under
the brake, see figure 20.
6) Fasten the remaining screw furthest
away from the block, and then make
sure that both screws are tightened
properly, see figure 21.
7) Grease should be applied to the
cavity on top of the brake block or to
the top nut on the brake to ensure a
smooth interaction between the two.
8) Finally, remount the side cover by
screwing in the corner screws first.
Hereafter the remaining screws.
PLEASE NOTE
Clean the flywheels outer
diameter to an even smoother
ride.
!
020
