ASSEMBL
Y
BODY
BIKE
®
I N DOOR C YC L E
SADDLE
1: Place the saddle in the track on the
seat post.
2: Secure the saddle with the remain-
ing adjustment handle, see fi gure 4.
To fasten the saddle to the adaptor
and adjust the tilt of the saddle use
a 14 mm wrench on the bolt marked
with an A on fi gure 4.
PEDALS
1: Place the right pedal arm with the
socket pointing upwards, see fi gure 5.
2: Put maximum resistance on the
brake, so the pedalarm is unable to
rotate, see fi gure 6.
Figure 7
9
Please note
- the pedals are marked with
R for Right and L for Left side.
- the pedals should always be
screwed on in the direction
of the handlebar, see fi gure 7.
- make sure that the hole
in the pedal arm is greased
when mounting the pedal.
- start mounting the pedal by
hand as tools will tighten the
pedal at a wrong angle.
Figure 6
Figure 5
Figure 4
WASHER
A
3: After tightening by hand, use a
15mm pedal wrench to tighten
the pedal completely (45N/4,5kg).
