background image

GEN 3 TRAIL DOO

951.808.0750

[email protected]

INSTALLATION INSTRUCTIONS

DOOR HINGE STEP • JEEP WRANGLER JL/JT

PART NUMBER: 

5146

PAGE 

1

The Body Armor 4X4 Door Hinge Step for Jeep Wrangler JL/

JT is easy to install using simple hand tools with no drilling 

or cutting required.  If you are not confident in the installa-

tion please seek the assistance of a professional installer.

BEFORE YOU BEGIN

Open the box and inspect the contents.  Check each 

item against the component list below.  If anything is 

missing or damaged, contact Body Armor 4X4 custom-

er service.

COMPONENTS:

 2 

DOOR HINGE STEP

 4 

RUBBER GASKET

 8 

M8-1.25 X 25MM BUTTON HEAD CAP SCREW

STEP 1: 

PARK AND SECURE THE VEHICLE

Park the Jeep on a flat, level service and set the park-

ing brake.  Wear eye protection from this point forward.  

Make sure the door is fully shut and latched.  Lock the 

door to prevent accidentally opening it during the in-

stallation process.

STEP 2: 

REMOVE THE OE DOOR HINGE BOLTS

Use a T50 Torx wrench or driver bit to remove the two 

bolts from the door side of the upper and lower hinge.  

Be careful to not bump or move the door from its closed 

position during the remainder of the installation pro-

cess.

PIC 01: 

Remove the OE hinge bolts.

STEP 3: 

INSTALL THE DOOR HINGE STEP

Use a 5MM Hex Key or Driver Bit to install the 

DOOR HINGE 

STEP

 to the door, using the provided 

M8-1.25 X 25MM BUT-

TON HEAD CAP SCREWS

.  Make sure to place the provided 

RUBBER GASKETS

 between the Step and the Jeep’s door 

hinge to protect the Jeep’s paint.

PIC 02: 

Install the Door Hinge Step.

Reviews: