Bodmer Ton AG
Holzrüti 1
CH-8840 Einsiedeln
Phone
+41 55 418 28 58
Website
www.bodmer-ton.ch
5
3.2.1.
Factory set programmes
The programmes 1-3 are pre-set by the factory, and work for the most common uses.
These programmes can by changed as well.
Programme
Nr
t1
Temp 1
t2
Temp 2
t3
Temp 3
t4
Temp 4
t5
Temp 5
Drying
1
5:00 h
150 °C
3:00 h
150 °C
Onglaze fire
2
6:40 h
450 °C
0 min
750°C
15 min
750°C
Once-fire
980°C
3
9:00 h
720 °C
0 min
980°C
20 min
980°C
Glaze firing
1020°C
4
6:00 h
650°C
0 min
1020°C
20 min
1020°C
Glaze firing
1280°C
5
6:00 h
650°C
0 min
1260°C*
20 min
1260°C*
Once-fire
6
5:00 h
150 °C
3:00 h
150 °C
4:30 h
650°C
0 min
980°C
20 min
980°C
*With the programmed final temperature of 1260°C and retention time of 20 minutes 1280°C
can be reached.
3.3.
Changing the programmes
To change the controller’s programmes, first choose a programme as described earlier in
chapter 3.2.
Entering the time segments
Push the button once. The LED
t1
will start blinking. You are now in the altering mode for
“time”. You can now change the value that is displayed using the keypad. Use the buttons
and to move back and forth through the time segments scale.
Entering the temperatures
Push the button once. The first temperature LED will start blinking. You are now in the
altering mode for “temperature”. You can now change the value that is displayed using the
keypad. Use the buttons and to move back and forth through the temperature segments
scale.
