4
I
– Initial checks
Thank you for choosing a BODET clock.
This product has been carefully designed, adhering to ISO 9001 quality processes, to ensure your
satisfaction. We recommend that you read this manual and the general safety measures and
operating instructions carefully before handling the clock.
Retain this manual for reference for the lifespan of your clock.
The information supplied is non-binding; Bodet reserves the right to make changes to equipment,
including functional, technical and aesthetic changes or changes to colours, without notice.
Failure to observe these instructions may cause irreversible damage to the clock and
invalidate the warranty.
These instructions relate to NTP models. For other models, please refer to the corresponding
instructions.
1.1 Unpacking the clock
Carefully unpack the clock and check the contents of the package. This should include:
• Style 5S or 7S Hospital clock
• Anti-static cleaning kit
• Manual
•
IMPORTANT: product identification label
An identification label is affixed to the back of the clock. Use the URL link shown to download
these instructions.
1.2 Cleaning
Use an anti-static product identical to that in the cleaning kit provided.
Never use alcohol, acetone or other solvents, which may damage your clock’s casing or glass.
1.3 Pre-requisites
To programme the clock you must install
BODET Detect
software (Cf. page 7). This software
is available to download for free on the BODET website www.bodet-time.com.
Note: the BODET clock must be connected to a PoE network socket via a PoE switch or a PoE
injector. (802.3af, class 3: multicast, class 0: unicast).
Bodet recommends the following devices:
• PoE injectors: Zyxel, Tp link, D-Link, HP, Cisco, Axis, ITE Power Supply, PhiHong,
Abus, Globtek
• PoE switches: D-Link, HP, Planet, Zyxel, Cisco, NetGear, PhiHong
Select a location to install the clock, preferably away from sources of electrical interference, such
as transformers.
EN
