8
- For the PTP option card, connect a MCX cable between the option card and Netsilon:
PTP option card
MCX cable
The MCX coaxial cable of the PTP card smust be connected here
This operation is only valid for the PTP option card.
- For the IRIG INPUT option card, position the jumper to select the input impedance: 4.7K / 600 / 50 Ohms or high
impedance (no jumper). By default, the jumper is positioned on the option card for 600 Ohms.
Jumper
This operation is only valid for the IRIG INPUT option card.
9) Close up the Netsilon device by refitting the black cover identically to its original condition.
10) Connect the power supply and turn the switch to ON (I).
11) Connect the network cable to the ETH0 port to access the web server.
