11
IV.2 CHRO menu: count and countdown setting
1. Enter the CHRO menu (see page 10).
2. A message flashes (up, down or day). Choose the count
mode with the [R] key. «Up» starts timing, «down» starts
countdown timing, «dayd» starts a day countdown and
«dayU» starts a day count up (the counting will stop on the
last day at midnight).
3. Press the [S] key to validate your choice.
4. Enter hours with the [R] key. Press the [S] key to validate.
Then enter minutes with the [R] key. Press the [S] key to
validate. And finally, enter the seconds with the [R] key.
Press the [S] key to validate.
Note : the value entered is the max value to reach in counting
mode and the starting value in the countdown mode.
5. If Day chosen:
a. Choice between J (jour in French), d (day in English) and
(tage in German) using the [R] key. Press the [S] key to validate
the choice.
b. Enter the unit of days to count down with the [R] key. Press
the [S] key to validate.
c. Enter the tens of days to count down with the [R] key. Press
the [S] key to validate.
d. Enter the hundreds of days to count down with the [R] key.
Press the [S] key to validate.
Note that on the last day the countdown changes to Hours / minutes / seconds countdown.
