![background image](http://html.mh-extra.com/html/bodet/btx6015/btx6015_installation-manual_2782405015.webp)
15
1/ Open the BTX6015 scoreboard:
- Unfasten the 2 screws on the right or left side (it doesn’t matter which side).
-Remove the side.
- Slide the glass, taking care not to rub against the LED modules, and then remove the glass.
2/ Unscrew the LED module from the chronometer furthest to the left, in order to access the electronic
board.
3/ Attach the DIN connection cable between the scoreboard and scoreapp (ref.: 408901):
Connect the communication cable to the SCOREAPP box:
- Connect the RT+ (white) and RT- (brown) cables (MDM terminal block) to the scoreboard’s
electronic board::
With the other side of the cable, connect the DIN plug to the SCOREAPP box.
4/ Referring to the table on the next page, check or modify the DIPs on the BTX6015 scoreboard.
Note: refer to the SCOREAPP manual to access the test mode and the technician menu.
2.7 Test mode (with XTREM keyboard)
Select the time of day mode by pressing the OFF (2) key.
Press the RESET (5) key for 3 seconds.
The test mode performs to following operations:
1/ Display of the program version number.
2/ Test of the cabling.
3/ Test of each module.
4/ All LEDs ON.
5/ All LEDs OFF.
6/ Display of the keyboard channel number.
7/ All Leds OFF.
2.9 Technician menu (with XTREM keyboard)
To access the technician menu, press the keys + (1) and - (5) simultaneously for 3 seconds.
Select the parameters with the keys ◄ (2) and ► (3).
Validate with the key OK (4)
dF: if Yes (y), reloads the factory default values. (n = No).
ti : Time setting: