7
3. CoMMissioninG
Netsilon configuration is performed exclusively on the web server. In order to be able to access the web server it is
necessary to configure the ETH0 port via the front panel keypad and the LCD screen.
TIP: in order not to disrupt Netsilon synchronisation with the other products present on the network, it is
important to maintain identification of the time server.
There are two solutions for accessing the web server:
>
With a DHCP server: automatic assignment of an IP address.
>
Without a DHCP server:
manual assignment of a fixed IP address via the control panel in the Netsilon network
menu.
3.1
Factory configuration
The default configuration parameters have been selected to facilitate initial configuration. A single account is
activated on shipment from the factory.
>
Default web server user account:
>
Username: bodetadmin
>
Password: admin49
This account cannot be deleted. However, it is strongly recommended to change the password
When first running Netsilon, the default parameters are as follows:
Functions
Default status
Means of configuration
Control panel & LCD
screen
Unlocked
Control panel (technician menu) + web server
Language: English
Web Server
Rotation of information: time,
network, synchronisation and
system status
Web Server
USB port
Enabled
Web Server
ETH0 Ethernet port
DHCP: ON
Control panel + web server
IP address not given
Control panel + web server
Services
DNS: ON (only)
HTTP: ON
Web Server
(only HTTPS can be enabled or disabled)
