Böcker TL 1512, Operating Manual

Page: 43 / 115

Steel frame Table form lift TL 1512
213300043 43
Fig . 25: Mast anchorage for left- or right-hand side mast
1. Align the anchor plate (4) and
connector (1) (ensure they are
parallel to the platform)
2. At the height of the first floor,
attach the connector (1) to the
mast.
3. Pin the mast anchor pipe (2) to
the connector (1) (rotate 1 and 2
to the outside; this allows you to
insert the inside pin)

see
Fig.
26
4. Attach the assembly cable (3)
approx. 800 mm above the
connector (1). Now, use a snap
hook to connect it to the mast
anchor pipe (2).
5. Pin the mast anchor pipe (2) in
the pockets of the anchor plate
(4)
6. Use the connector (1) to align the
mast anchor pipe (2) horizontally.
(if necessary, loosen 1 and 3 and
shift vertically)
7. Drill into the anchor plate (4) and
use two anchor bolts to attach the
plate.
8. Use a rotary joint to connect the
rotation prevention device (5) to
the mast and connector (1). Both
pipes must clamp at least two
mast struts (9).
Fig. 26: Mast anchor pipe pinned to connector
In order to attach the anchor plate we recommend the anchor type below:
Fischer mounting system
– Anchor bolt FAZ II 12/30 GS
article number: 96340
Insert the pin
in the
direction of
the arrow