background image

5

–  Do never open the box or the plug of the motor! Due 

to unauthorised opening and inappropriate repairs the 
warranty claim expires.  Furthermore, risks for the user 
might occur. 

–  Repairs can only be carried out by specialized person-

nel!

–  Handset, plug and motors are only supposed to be used 

as in the manual specified purpose!

–  Please check regularly if the cable or box is damaged. If 

this should be the case do not use the bed. Exchange 
the parts after consulting your dealer.

–  Never let liquids infiltrate inside the motors or plug; it 

might lead to electrical blows or short circuits.

–  When you install the electrical cables please mind that 

no sharp edges or kinks occur.  The cables are not allo-
wed to go through the adaptation mechanism

Explanation of symbols used on name plate:

 

Mark of conformity according to guidelines for medical

 

products

 

The first digit indicates the protection class for shock-hazards 

 

and penetration by solid objects 

 

The second digit indicates the protection class for 

 

penetration by water

 

„Medical equipment part, type B“

 

„Only to be used in dry environment“

 

Protection class II (duoble Iinsulation, protective insulation)

 

This product must be disposed to a selected waste disposal

 

within the european union. This product may not be disposed

 

together with unsorted domestic waste.

 

Take note of the accompanying documents

 

Thermal cut-out in the transformer 

 

Doubly insulated transformer

Summary of Contents for combiflex.fc





































Reviews: