Safety
Operating manual
(Serial number)
Page 10 of 27
Lift 240
2.4 Safety
concept
2.4.1 General
information
Protection is the objective:
•
of the operator against injuries,
•
the lift table against damages and standstills,
•
the environment against dangers.
The following protective measures were applied in reference to a risk
analysis:
•
12 V power supply for the drive unit to protect against electrical
shock.
•
Bellows over scissor rods and drive unit
•
mechanical height limitation
•
Battery-powered wireless remote control
•
Flare signals as a status indicator,
•
Safety instructions on the device and in the operating instructions.
2.5 Residual
risks
The rated loads of max. 25 kg may not be exceeded.
Note
Observe all
•
warnings and safety instructions,
•
other markings, such as transportation devices attached o the
device.
2.6
Staff requirements, due diligence
2.6.1 General
information
Never allow personnel under the influence of response-reducing
substances or is incapable of operating the machine based on health
reason to operate the device.
Note
The operating instructions must always be available at the location of
the device. The location must be known to employees.