12
Hardware Reference
Connecting to a TV or VCR without Audio/Video
Jacks
1. Set the channel switch on the RF modulator (not supplied)
(Radio Shack cat. # 15-1283A) to VHF channel 3 or 4,
whichever is not used or the least used in your area.
2. Connect the RF modulator to the Composite Video Output
and Right/Left audio channel jacks on the unit.
3. Use an RF coaxial cable to connect the TO TV jack on the
adapter to the ANTENNA IN jack on the back of your TV.
You may need to disconnect the antenna/cable from your
TV to make this connection. Connect the antenna/cable to
the ANTENNA IN jack on the RF modulator.
4. Connect one end of the telephone cable to the unit’s
telephone jack. Connect the other end to the telephone wall
jack.
5. Connect the proper end of the AC power cord to the unit’s
power receptacle.
6. Set your TV to channel 3 or 4, as selected in step 1 above.
PDFref.p65
11/25/98, 10:46 AM
12
