GENERAL OPERATION
1. Connect the USB cable to the device and power on, as
shown in the figure below:-
2. Turn on the power and start the device automatically.
Press and hold the power button to start or shut down the
device.
3. Work indicator description
Air inlet maintenance (approx. once every two weeks)
Gently wipe off the dust or any build up from the air inlet
with a clean soft cloth or a clean soft fine-bristle brush.
Frequency of maintenance depends on the working
environment of the device.
For a poor working environment (heavy dirt and dust),
you may need to increase frequency of cleaning and
maintenance.
(Attention)
Please do not start up the product with the filter screen of
air inlet removed. (The inhaled dust will cause
malfunction if it enters the product).
When the device not in use for extended period.
§
Unplug the USB cable from the device.
§
Wrap in a plastic bag and store in a dry place.
TROUBLESHOOTING
Please confirm the following content first. If you still cannot solve the trouble after performing such operation, please unplug
the USB cable from the device and contact after-sales service.
Possible Situations
Check the following
Device does not work
Is the device connected to the USB cable correctly and firmly?
Unpleasant odour
Is the device or filter screen dirty?
Maintenance is required.
When fog ions are generated, you may feel a trace of ozone odour, which are not harmful to
human health.
Buzz sound at
the air outlet
Such sound may occur when Fog ion are generated.
Depending on the usage environment and operation mode, the volume of the sound may differ.
This is not an abnormal phenomenon.
Shutdown
Is the USB plug connected?
Please connect the USB cable to power source correctly.
Dim running
Indicator
Is an input power supply with a maximum output
current of 1A or less?
Please use an input power supply with a maximum output current of 1A or above correctly.
Smaller or varying
air volume
FURTHER INFORMATION
•
Environmental conditions for generation of Fog ion. It is produced from indoor air, which may not be stable due to levels
of temperature and humidity.
Indoor temperature: about 5
℃
- 40
℃
(dew point temperature: above 2
℃
)
Relative humidity: about 15% - 85%
•
A minor trace of ozone is produced along with nano water ions. However, the amount of ozone produced is far less than
the amount of ozone existing in natural forests, and it will not cause any harm humans.
Disclaimer :
Boca Portable Air Sanitiser is not medical device and is not intended to prevent, alleviate or treat
respiratory illness or infection.
DEVICE SPECIFICATION
Product model:
FCDS-03C
Product name:
Portable Air Sanitiser
Applicable area:
8M
2
External dimension:
Ø 68x190mm
Input voltage:
DC5V/2A
Sound pressure level
: 32dB
Fan Speed:
4500rpm
Nano water ion concentration:
805 billion /sec
Operation mode:
Key Switch
USB cable:
USB TYPE-A to USB TYPE-C
Weight
: 340g
MAINTENANCE
Maintenance Precautions
1.
Ensure the device is disconnected from power source
before maintenance.
2.
To maintain the device at the optimal performance,
regular cleaning of the air inlet/outlet vent is
recommended at least once every two weeks or
whenever it is clogged by dust or dirt.
3.
Gently wipe the external surfaces of the device regularly
with a clean dust absorbing soft cloth.
4.
DO NOT
wipe the device with a coarse cloth, it may
cause surface damage to the device.
5.
DO NOT
use cleaning agents of any kind which may
cause malfunction of the device.
This product is manufactured for BOCAIR Pty Ltd (ABN: 45 659 929 772), Exclusive distributor
for Australia and New Zealand.
www.bocair.com.au
BOCA Sanitiser
