17
17
17
17
17
Section
Section
Section
Section
Section Thr
Thr
Thr
Thr
Three: Netw
ee: Netw
ee: Netw
ee: Netw
ee: Networ
or
or
or
ork Conf
k Conf
k Conf
k Conf
k Configura
igura
igura
igura
iguration
tion
tion
tion
tion
The BocaNET-24 is intended to connect multiple
workstations (stand-alone) and/or other concentrators to an
Ethernet star topology network.
3.1 10B
3.1 10B
3.1 10B
3.1 10B
3.1 10BASE-T POR
ASE-T POR
ASE-T POR
ASE-T POR
ASE-T PORTS
TS
TS
TS
TS
The BocaNET-24 has 24 10BASE-T UTP (unshielded twisted
pair) ports to connect to other hubs or workstations. This
connection uses an RJ-45 8-pin connector. When connecting
to workstations, a straight-through connector is used. When
connecting to other hubs, a “crossed” cable is used.
Connections are on the next page. See Section Four: Cabling
Characteristics for pin-outs of cables.
NOTE: If a straight cable is used to connect to
NOTE: If a straight cable is used to connect to
NOTE: If a straight cable is used to connect to
NOTE: If a straight cable is used to connect to
NOTE: If a straight cable is used to connect to
another hub, use the switch to internally cross Port 24
another hub, use the switch to internally cross Port 24
another hub, use the switch to internally cross Port 24
another hub, use the switch to internally cross Port 24
another hub, use the switch to internally cross Port 24
the transmit and receive pairs of the cable.
the transmit and receive pairs of the cable.
the transmit and receive pairs of the cable.
the transmit and receive pairs of the cable.
the transmit and receive pairs of the cable.
Network Configuration
Network Configuration
Network Configuration
Network Configuration
Network Configuration
9379.p65
1/28/99, 2:51 PM
17