1065 South Rogers Circle • Boca Raton, FL 33487 • Phone (561) 998-9600 • Fax (561) 998-9609
Roll Holder Adaptor Kit for Lemur-X UPG (P/N 424184)
Kit will include floor plate (2pcs), one roll holder arm, one spindle, one adjustable stopper and installation hardware.
1. Attach the spindle onto the roll holder arm using the two Philip
¼” Hex head screws.
2.
Align the two floor plate pieces (larger piece on top of smaller piece) so that the two screw holes align. See step
# 8 photo to orientate pieces.
3.
Install the two 3/16
” hex head Taptite screw and tighten.
4. Install the two #4 Kep nuts onto screws and tighten
4X
Rubber Feet
6X
3/16
” Hex Head
#4 Taptite
2X
1/4" Hex Head
#8 Taptite
2X
#4 Kep Nut
