Quick Start Guide
Congratulations on your new Bob and welcome to the bObsweep family!
Everything Bob needsfor his first clean can be found inside his box.
In just a few easy steps, Bob will be ready to work!
Install Bob’s Side Brush
Bob’s side brush allows him to sweep along corners,
walls, and other hard-to- reach places. To install the side brush: Flip Bob over onto a
flat surface. Secure the side brush into the socket on Bob’s underside using the flathead
screwdriver and a screw found in Bob’s box.
Charge Bob
Plug the charging adapter into the side of the charging station.
The station’s red power light will turn on. Place Bob on his charging station with the
metal plates on his underside lined up with the nodes on his station.
Prepare Bob’s Remote
Bob’s FullCommand™ remote runs on 2 AAA batteries (not included).
Bob is now ready to clean!
Press the START button on his cover
— or AUTO on his FullCommand™ remote —
and he will clean on his default
Robot setting.
