bObsweep PetHair WP460012, Owner'S Manual, Page: 16 / 60

Select the cleaning mode that best suits your needs. Bob automatically returns to his charging station
after he completes a cycle in each mode.
Auto 1 is Bob’s default cleaning mode. To select it, press START on his cover.
Quick Start
Cleaning Modes
Selecting a Cleaning Mode
UV
DIRT
TROUBLE NR.
CAPACITY
AUTO SPOT WALL FOLLOW DOCK
MIN. CLEANING
CHARGING
READY
Auto 1 (Deep Clean)
Bob will thoroughly cover a large area until
his battery power reaches 15%.
Auto 2 (Quick Clean)
Bob will cover a medium-sized area for 30
minutes.
Auto 3 (Touch Up)
Bob will cover a small area for 15 minutes.
1.
Press the MODE button on Bob’s cover to
switch between Auto, Spot, and Wall Follow
modes.
.
Selecting a Cleaning Mode
UV
DIRT
TROUBLE NR.
CAPACITY
AUTO SPOT WALL FOLLOW DOCK
MIN. CLEANING
CHARGING
READY
Spot 1
(Spiral Track™)
Bob will target a small area
by spiraling outward.
UV
DIRT
TROUBLE NR.
CAPACITY
AUTO SPOT WALL FOLLOW DOCK
MIN. CLEANING
CHARGING
READY
2.
Press the PROGRAM button to toggle between
Auto 1, Auto 2, and Auto 3, or Spot and Spot 2
modes.
3.
Press the START button to send Bob to clean.
UV
DIRT
TROUBLE NR.
CAPACITY
AUTO SPOT WALL FOLLOW DOCK
MIN. CLEANING
CHARGING
READY
Wall Follow
(Wall Track™)
Bob will clean along the
perimeter of your home.
Spot 2
(Waffle Track™)
Bob will target a 6 x 5 feet
(1.8 x 1.5 m) spill zone by
tracing a grid pattern.
28