Quick Start
Remote
Control
Syncing the Remote
Bob’s edge sensors are located along his front, not along his back. Do not
reverse Bob towards edges, as he will fall.
Navigating Bob
Hold down the navigational buttons to control Bob’s movements.
Quick Tip:
Bob can be manually controlled only while he is in his default Robot mode, not while he is in Quick
Clean or Wall Follow modes.
Using the navigational buttons resets Bob’s cleaning algorithm, so it is not recommended that you
repeatedly control Bob while he is cleaning. It is best give Bob some time to understand your home so
he can clean at his best.
Important to Note:
2.
Press the button to return Bob to his
default Robot mode.
1.
Hold down a navigational button on the
remote to keep Bob moving in the desired
direction.
28
27
