BOB’S SPACE RACERS® PUPPY JUMP
TM
ARCADE GAME MANUAL
8
INSTALLATION
Play zone (Operation Zone):
This machine requires space for playing the game. Be sure to leave enough space when installing the
machine.
Locations to avoid:
Game Leveling:
Install this machine on a flat surface. Make sure that the machine is level with the floor.
Disconnect game power before moving
Make sure all wheels are intact. Replace any wheels that are damaged or
broken before moving the game.
When moving the game, DO NOT slide the game across the floor
Ensure the game is level before connecting the power
WARNING
●For indoor use only!
ATTENTION
●
Be sure to check the Electrical Specifications.
Ensure that this product is
compatible with
your location’s power supply, voltage and frequency requirement.
A plate describing Electrical Specifications is attached to the product. Non-
compliance with the Electrical Specifications can cause a fire and electric shock.
● Putting many loads on one electrical outlet can cause generation of heat and a fire
resulting from overload.
WARNING
The machine is designed for indoor use only. Never install this machine
outdoors or in any of the following:
● Locations exposed to direct sunlight
● Locations subject to rain or water leakage.
● Unstable locations or locations subject to vibration.
● Dusty, hot, or damp locations.
NOTICE
