background image

BOB’S SPACE RACERS®                                                                                                                                  PUPPY JUMP

TM

 ARCADE GAME MANUAL  

 

29 

WARRANTY 

 

BOB’S SPACE RACERS INC. 

90 DAY COIN-OPERATED GAME WARRANTY

 

 
1. 

INCLUDED IN THIS WARANTY Bob’s Space Racers

®

, Inc. warrants to the original purchaser only that the equipment that is the subject of 

this sale conforms to its specifications, and is free from defects under normal service for a 90 day period from the original date of deliver.   This 
warranty does not include any  damages resulting from occurrences listed in paragraph 2 below.  This warranty is not transferable under any 
circumstance.  Any claims under this warranty must be received in writing by Bob’s Space Racers

®

, Inc. within 120 days from date of delivery.  

Within a reasonable time of such written notification Bob’s Space Racers

®

, Inc. will replace or repair any defective component of the equipment 

or part thereof which fails for reasons other than normal service, use, or wear.  Bob’s Space Racers

®

, Inc. reserves the right to request dated 

proof of purchase by the end user (original purchaser) at any time.  Light bulbs are specifically excluded from this warranty and shall be the sole 
responsibility of the purchaser.  Bob’s Space Racers

®

, Inc., within its sole discretion, makes the final determination as to whether to repair or 

replace any component and whet

her any such repair or replacement shall be performed where the equipment is located or at it’s home facility 

in Volusia County, Florida, or another facility of its sole choice.  Any and all freight charges for the purposes of repair o r replacement shall be 
paid by the original purchaser.  All defective parts shall be returned to Bob’s Space Racers

®

, Inc. if requested.  Bob’s Space Racers

®

, Inc. does 

not  warrant  that  the  equipment  will  meet  any  original  purchaser’s  specific  requirements  or  that  the  operation  of  the  equipment  will  be 
uninterrupted.  These remedies are the original purchaser’s exclusive remedies for breach of warranty. 
 
2. 

EXCLUDED BY THIS WARRANTY Bob’s Space Racers

®

, Inc. does not warrant (a) any product, components or parts not manufactured by 

Bob’s Space Racers

®

, Inc.; (b) damages caused by use of the equipment for purposes other than those for which it was designed; (c) defects 

caused  by  failure  to  provide  a  suitable  installation  environment  for  the  equipment;  (d)  damage  caused  by  unauthorized  attachments, 
modification,  or  service;  (e)  damage  caused  by  normal  wear  and  tear  or  improper  power  supply;  (f)  damage  caused  by  accident  or  disaster 
such as fires, flood, lightning, and wind; or (g) any other abuse or misuse of the equipment. 
 
3.  EXCLUSIVE WARRANTY.  THE FORGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR REMEDIES, 
WHETHER WRITTEN, ORAL OR IMPLIED.  THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE 
HEREOF.    ANY  AND  ALL  IMPLIED  WARRANTIES  OF  MERCHANTABILITY,  FITNESS  FOR  A  PARTICULAR  PURPOSE,  COURSE  OF 
DEALING OR USAGE OF TRADE ARE HEREBY EXPRESSLY DISCLAIMED AND EXCLUDED. 
 
4. 

REMEDIES LIMITED. UNDER NO CIRCUMSTANCES, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, SHALL BOB’S 

SPACE RACERS

®

, INC. BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR INDIRECT, SPECIAL INCIDENTAL OR CONSEQUENTIAL 

ARISING  OUT  OF  THE  USE  OR  INABILITY  TO  USE  THIS  EQUIPMENT  INCLUDING  BUT  NOT  LIMITED  TO  ANY  CLAIM  FOR  LOSS  OR 
PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF USE OF THE EQUIPMENT, OR ANY ASSOCIATED EQUIPMENT, FACILITIES OR 
SERVICE,  DOWNTIME,  THE  CLAIMS  OR  COSTS  OF  THIRD  PARTIES  INCLUDING  CUSTOMERS  AND  INJURY  TO  PROPERTY.    Some 
states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so 
the above limitations or exclusion may not apply to you.  This warranty gives you specific legal rights, and you may also hav e other rights which 
vary from state to state. 
 
5.  NO OTHER WARRANTIES.  Unless modified in writing and signed by both parties, this agreement is understood to be the complete and 
exclusive agreement between the parties, superseding all prior agreements, oral or written, and all other communications between the parties 
relating to the subject matter 

of this agreement.  No employee or representative of Bob’s Space Racers

®

, Inc. or any other party is authorized to 

make any other warranty or to assume any other liability in connection with the sale of its equipment. 
 
6.  TIME  LIMIT  FOR  CLAIMS.    Any  claim  fo

r  breach  of  warranty  or  claims  under  this  warranty  must  be  received  in  writing  by  Bob’s  Space 

Racers

®

, Inc. within 120 days following delivery of the equipment. 

 
7. 

FUTURE  CHANGES.  Bob’s  Space  Racers

®

,  Inc.  reserves  the  right  to  reserve,  change  or  modify  the  construction  and  design  of  its 

equipment  or  any  component  part  or  parts  thereof  without  incurring  the  obligations  to  make  such  changes  or  modifications  in  p resent 
equipment. 
 
8.  ALLOCATION  OF  RISKS.    This  agreement  allocates  the  risks  of  equipment  failure  bet

ween  Bob’s  Space  Racers

®

,  Inc.  and  the  original 

purchaser.    This  allocation  is  recognized  by  both  parties  and  is  reflected  in  the  price  of  the  goods.    THE  PURCHASER  ACKNOWLEDGES 
THAT HE HAS READ THIS AGREEMENT, UNDERSTANDS IT, AND IS BOUND BY ITS TERMS. 
 
9.  TO OBTAIN WARRANTY SERVICE.  The original purchaser must, at his/her own expense, bring or ship the equipment to an authorized 
location for service.  Additionally, the original purchaser must pay all freight, shipping or transportation charges for the  return of the equipment 
from Bob’s Space Racers

®

, Inc. to the original purchaser.  Telephone or write: 

 

Bob’s Space Racers

®

, Inc. 

427 15

th

 Street 

Daytona Beach, FL 32117 

Telephone number: 386/677-0761 

FAX: 386/677-0794

 

 

 

 

Summary of Contents for Puppy Jump






























Reviews: