Bob's Space Racers PRIZE WHEELS, Operator'S Manual

Page: 4 / 24

P a g e | 4
Bob’s Space Racers
®
Inc. ©1976-2019
Removing Product off Pallets
STOP!!!
PLEASE READ BEFORE REMOVING PRODUCT OFF PALLETS
Note: BSR Recommends at least three employees capable of lifting up to
80 lbs. to assemble this game
•
Pallet 1
Front Counter
First Remove
Operator’s Walkway before removing Player Counter from
pallet.
•
Pallet 2
Lower Merchandise Cabinet
First Remove Marquee and Top Wheels before removing Lower
Merchandise Cabinet from pallet.
•
Pallet 3
Upper Merchandise Cabinet
Do not slide Upper Merchandise Cabinet off pallet, it can damage the bottom.
Setting Up the Prize Wheels
•
Place the Upper Merchandise Cabinet behind the Lower Merchandise Cabinet
along the wall
•
Place the Lower Merchandise Cabinet at least 3-feet from the back wall. This will
allow game technicians to service the game as needed.
Note: Connect the Jumper harness to the main board and run under the Lower
Merchandise Cabinet also include the Speaker Cable before assembling the rest
of the game. As both Jumper and Speaker Cable will be connected to the
harness in the Player Counter.
•
Install Top Wheel
There are four bolts with washers that secure the Top wheel to the middle wheel.
Note: Connected the wires from the second wheel to the top wheel at this time.
•
34-pin Ribbon Cable will be connected in to the top connector INPUT
•
Two 10-pin Power Connector will connect into the middle Row
•
8-pin connector that Identifies the Top Wheel.
•
2-pin connector for the Side Lamp
•
Allow a little over 30-inches for the
Operator’s Walkway
Note:
Ensure the Jumper’s are not pinched as they will extend to the Player
Counter and connect to the Button Assembly.
•
Install Player Counter
Note: Connect Jumper to the Button Assembly and Speaker Cable.
Bottom
Wheel
Identifier
Input (Ribbon Cable)
Top
Wheel
Identifier
Side
Lamp
Middle
Wheel
Identifier