Bob’s Space Racers Inc. © 2015
MAY 2015
pg. 2
GEAR INSTALLATION INSTRUCTIONS:
1.
Remove the front glass from the game
a.
Using a #2 star (phillips) type screwdriver,
remove the 3 screws that secure the glass
retaining bracket.
b.
Open the front counter
c.
Gently lift the glass from the slot and set
aside.
DO NOT SET GLASS ON HARD SURFACES!
2.
Remove the bottom gear from the motor bracket
and set aside.
3.
Remove the middle gear and move it the bottom
position
4.
Remove the top gear and move is to the middle
position
5.
Install the supplied 1:1 close ratio gear (orange) in
the top position.
Replace the glass in the reverse order you did
before.
Be careful
when replacing the glass. It
is always recommended you have a second
person to hold the glass in place as you secure
the retaining bracket into place.
BONUS WHEEL INSTALLATION
1.
Using the supplied Hex head wrench (in the parts kit),
unscrew the 6 Hex type screws from the bonus wheel plex
cover.
2.
Replace the bonus wheel plex cover with the updated bonus
wheel plex cover.
3.
Replace the hex head screws to secure the bonus wheel plex
cover to the bonus wheel assembly.
Set aside the Gear you pulled out and the bonus wheel plex
cover in a secure location so that it may not get damaged.
