Bob’s Space Racers® Inc. © 2017
6-2
WARNING!
DO NOT ENTER PROGRAMMING MODE UNLESS YOU ABSOLUTELY HAVE TO!
Inadvertently, c
hanging program settings can cause undesirable results to your game. Bob’s Space Racers®
Inc. has set these options to achieve the highest turn-around time and optimal game performance.
Programming Mode
1.
Locate the Master Board.
Note:
This is located on the backside of the game. It may be labeled Master, Master Board or M.
2.
Hold down the
Select
and
Enter
buttons for 4 seconds to enter program mode.
3.
Press either
Up
or
Down
to scroll through the options.
4.
Press either
Left
or
Right
to change the options value.
Note: Changing the value, sets and saves the value.
5.
Press the
Select
button to exit programming mode.
Note: While programing, the master board has a timed limit and if left idle, the master board will exit programing mode.
For further assistance, please call Bob's Spacer Racers Technical Support at 386-677-0761 ext:146 or e-mail at [email protected].
LCD Display
