Bob’s Space Racers® Inc. ©2017
P a g e
|
3
1.1.11
The
Master
board now needs to have the default values of the options set.
1.1.12
The option sheet sticker (
Figure 1.8
) is located on the
Master’s
plex cover.
1.1.13
Set the
Default
option’s values. Figure 1.8 illistrates that the default colomn is the third
colomn from the right.
Please Note: There is a safety protocol. Two minutes after entering into program mode it will exit automatically. If it exits
before accomplishing the procedure the master saves the last entry. Simply re-access program mode and continue where it
timed out.
1.1.14
Press
Select
to exit programming mode.
1.1.15
The game will then perform a self-test and return to stand-by mode. If done properly, the
Master LCD should look like
Figure 1.9
.
1.1.16
The game is ready for normal operation.
Figure 1.9
Figure 1.8
Default
Sample Option Sheet
