Bobot MOP 9030 Manual Download Page 4

Upper Side Aluminum Tube

Insert the tube into the upper

handle until the spring stud is fully placed

Lower Side Aluminum Tube

Insert the tube into the joint of

machine until the spring stud is fully placed

Installation

Mopping Cloth

Waxing Cloth

Operation

1) Choose Cleaning Cloths

Generally the mopping cloths (in pink) are for mopping, while the waxing cloths (in 

blue or green) are for waxing. 

Please choose the ideal cloths and velcro them to rotating pads

2) Water/Liquid Filling

Use a measuring cup to fill the water tank with clean water for wet mopping, fill it 

with waxing oil if you want to polish/wax wooden floor.

3) Turn ON/OFF Switch

A) Step slightly on the Power Switch, LED Light turns on, you can start using it now;

B) Step slightly on the Power Switch after use, LED light turns off, the machine is off.

If you keep the machine standby for 10 minutes above, it will enter SLEEPING mode 

automatically, step on the Power Switch twice to wake it up.

4) Start/Stop, Liquid  Spray

Press Start/Stop button to start waxing/mopping;

Press  Liquid Spray button to spray water/detergent/cleaning solution/waxing oil

Remarks: when you press the Start/Stop button or Liquid Spray button, the handle 

incidator light should be on and red. If the light is not on, please put AAA battery in 

the handle battery box, and then restart the machine.

5) Battery Indicator Light

There are three levels of battery capacity, which is 

indicated on the detachable battery pack; three 

green lights refer 100% battery, two green lights refer 

65% battery, and one green light refers  % and low 

battery, you need to recharge it.

6) Charging

Please only use original adapter supplied by the manufacturer for recharge.

Please charge it when there is only one green light on the detachable battery 

pack.

The battery pack is replaceable, however please only use original detachable 

battery pack supplied by the manufacturer. Other battery pack may destroy your 

device. If you’ve been using the battery for over 1 year and the machine can only 

work for less than 15 minutes after full charging, please replace it with new battery 

pack.

100%

65%

%

1

2

(orange)

Generally the mopping cloths (in orange or pink) are for mopping, while the 

waxing cloths  (in blue or green) are for waxing.  

3

Summary of Contents for MOP 9030







Reviews: