Audio input(Aux)Connection
Note:
For some computers, you may need to access the audio control panel to manually set the soundbar as
shown steps on above.
1. Firstly connect the soundbar to your PC, laptop, smart-phone, TV, or other audio devices by using an AUX cable
provided. Make sure that these devices have both AUX IN and AUX out terminals.
2. Then press the STANDBY button or INPUT button on remote control to switch the soundbar to Aux mode,
once the soundbar is connected in Aux mode, the screen will display " ” . And the music on your connected
device will play. Playback can only be controlled on your connected device.
10
.
Optical Mode
-Remove the cap of optical cable (keep the cap for the future use); check the direction of the plug. Connect the soundbar
and TV with the optical cable.
-Use this mode to play music from a TV with optical digital output on the sound bar. In TV sound settings, select the soundbar
optical connection (output for audio). When the optical cable is connected, the TV audio output is set to PCM format.
-The TV must have an optical digital output. Use the supplied optical cable to make the connection as follows:
1. Connect the optical cable to the optical digital output of your TV.
2. Connect the optical cable to the optical digital input of your soundbar.
3. Switch on the TV set and the soundbar. Set the connected TV to “PCM Stereo”. Set the audio output mode
as <automatic> or <decoded output as PCM state>.
4. Start playing on the TV.
5. Press “INPUT” button on the remote control or “STANDBY” button on the soundbar to select
- OPTICAL mode.
6. Use the volume buttons to adjust the volume to your requirements.
7. You can also change the audio settings by using the relevant buttons on the remote control.
OPTICAL lnput
OPTICAL Output
1. When connecting a device such as a TV/Set-top box/
DVD/ game console with optical cable, set the audio output
mode of the device to PCM mode (digital optical output).
2. Do not bend the optical cable, otherwise the
cable inside will be damaged.