External Clock Input (J6)
The recommended connector is a male BNC
Internal Clock Output (J15 and J16)
The recommended connector for J16 is a male BNC
The recommended connector for J15 is a Molex 2 pin female C-grid (Molex #50-57-
9402
)
or equivalent.
The recommended contacts for J15 are Molex female terminals with
gold contacts
(Molex #16-02-0087) or equivalent.
Pin Number:
Connection:
1 (denoted by arrow on connector)
Clock Out
2
Ground
Output Board Connection (Mini PCB Card Edge)
This card edge must be connected to either J1 or J2 on the Output Board
Fan Output Connector (J1 Fan)
The recommended connector is Molex 4 pin female C-grid (Molex #50-57-9404) or
equivalent.
The recommended contacts are Molex female terminals with
gold contacts
(Molex #16-
02-0087) or equivalent.
Pin Number:
Connection:
Specification:
1 (denoted by arrow on connector)
+5 Volts DC
5 V±2%
2
+24 Volts DC
24 V±6%
3
N/C
4
Ground
USB Communications Connector (J3 USB)
The recommended connector is a male USB Type B
Pin Number:
Connection:
1
Vbus + (+5 Volts DC)
2
Data -
3
Data +
4
Ground
2
Berkeley Nucleonics Corporation
[email protected] | www.berkeleynucleonics.com
2955 Kerner Blvd, San Rafael, CA 94901 | 800-234-7858
9/14