Mixer Manual 2017.indd • May 31, 2017
Page 3
BN Products - USA
SPECIFICATIONS
TECHNICAL DATA
BNR6169
BNR6400
BNR7000
BNR6402K
Power
1050W / 9 Apms
1.4Hp
1800W / 15
Amps / 2.4Hp
1400W/11.7
Amps/1.9 Hp
1800W / 15 Amps
/ 2.4 Hp
Voltage
120V / 60 Hz
120V / 60 Hz
120V /60 Hz
120V / 60 Hz
Number of Gears
1
2
1
2
No-Load-Speed
1-600 rpm
150 - 300 rpm
270-460 rpm
18-460 / 300-700
rpm
Protection/ Class of
Protection
Double Insulated Class II
Certification
ETL / GS / CE
ETL / GS / CE
ETL / GS / CE
GS / CE
Thread for Fixing the
Paddle
M14 & 1/2” Chuck
M14 & 1/2” Drill
Chuck
Specially de-
signed paddle
1/2” Hex Quick
Change Chuck
Mixing Paddle (CD max.)
4-3/4” (120mm)
6-1/2” (160mm)
5-1/2” (140mm)
4-3/4” (120mm)
• Avoid body contact with grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is ground-
ed.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not, use
a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inatten-
tion while operating power tools may result in serious
personal injury.
• Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat. and/or hearing protec-
tion used for appropriate conditions will reduce per-
sonal injuries. .
• Prevent unintentional starting. Make sure the switch is
in the off-position before connecting to power source.
• Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites
accidents.
• Remove any adjusting key or wrench before starting
the power tool. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool
in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from mov-
ing parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
POWER TOOL USE AND CARE
• Use the correct power tool for your application. The
correct power tool will do the job better and safer at the
rate for which it was designed.
• Do not use the power tool if the switch does not tum
it on and off properly. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/or the
battery pack before making any adjustments, changing
accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power
tool accidentally.
• Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
